Tire size
295/50R20 in inches
A 295/50R20 tire is 31.6 inches tall and 11.6 inches wide, on a 20-inch wheel. Written inch-style that is about 31.6x11.6R20 (an equivalent, not a size on sale). It rounds to a 32-inch tire.
| 295/50R20 | Inches | Metric |
|---|---|---|
| Overall diameter (height) | 31.6 in | 803 mm |
| Section width | 11.6 in | 295 mm |
| Sidewall height | 5.8 in | 148 mm |
| Wheel (rim) diameter | 20 in | 508 mm |
| Circumference | 99.3 in | 2523 mm |
| Revolutions | 638 per mile | 396 per km |
How it's worked out
The 50 means the sidewall is 50% of the 295 mm width: 147.5 mm, or 5.81 in. Height = wheel + 2 sidewalls = 20 + 2 x 5.81 = 31.6 in.
Similar sizes
Sizes within about 3.5% of the height of 295/50R20. The last column is your real speed at an indicated 60 mph if your speedometer was set for 295/50R20.
| Size | Height | vs 295/50R20 | Real speed at 60 mph shown |
|---|---|---|---|
| 265/70R17 | 31.6 in | -0.0% | 60.0 mph |
| 285/65R17 | 31.6 in | -0.1% | 59.9 mph |
| 265/75R16 | 31.6 in | +0.1% | 60.1 mph |
| 265/65R18 | 31.6 in | -0.2% | 59.9 mph |
| 285/70R16 | 31.7 in | +0.3% | 60.2 mph |
| 235/85R16 | 31.7 in | +0.4% | 60.2 mph |
| 265/55R20 | 31.5 in | -0.4% | 59.7 mph |
| 245/75R17 | 31.5 in | -0.5% | 59.7 mph |
Going bigger from 295/50R20
If 295/50R20 is your stock size, these are the commonly sold axle ratios that come closest to your stock overall gearing on bigger tires.
| Your ratio now | On 33s | On 35s | On 37s |
|---|---|---|---|
| 3.21 | 3.31 exact 3.35 | 3.55 exact 3.55 | 3.73 exact 3.76 |
| 3.42 | 3.55 exact 3.57 | 3.73 exact 3.79 | 3.91 exact 4.00 |
| 3.55 | 3.73 exact 3.71 | 3.91 exact 3.93 | 4.10 exact 4.15 |
| 3.73 | 3.91 exact 3.89 | 4.10 exact 4.13 | 4.30 exact 4.37 |
| 3.91 | 4.10 exact 4.08 | 4.30 exact 4.33 | 4.56 exact 4.58 |
| 4.10 | 4.30 exact 4.28 | 4.56 exact 4.54 | 4.88 exact 4.80 |
Exact = your ratio x new height / 31.6. Front and rear axles must match on a 4WD. Not every ratio is made for every axle. Want more pull than stock? Go one step shorter. More in the regearing guide.
Questions
How tall is a 295/50R20 tire in inches?
31.6 inches (803 mm). That is the nominal height: the 20-inch wheel plus two 5.81-inch sidewalls.
What is 295/50R20 in inches?
31.6x11.6R20: 31.6 inches tall, 11.6 inches wide, for a 20-inch wheel.
Is 295/50R20 a 32-inch tire?
It measures 31.6 inches on paper, so it rounds to 32. Real tires vary a little by brand, load and wear, so check the maker's spec sheet if a fraction of an inch matters.
How many revolutions per mile does 295/50R20 do?
About 638 per mile (396 per km), from its nominal circumference of 99.3 inches.
Nominal dimensions, calculated from the size marking. Real tires differ slightly by brand, rim width, pressure and wear. Fitment depends on your vehicle, lift and wheels: this page doesn't say whether a size fits. Updated 2026-11-14.